+ Reply to Thread
Results 1 to 2 of 2

Thread: print from the as/400 to a network print

  1. #1
    Guest.Visitor Guest

    Default print from the as/400 to a network print

    To print to a network attached printer over TCP/IP. CRTOUTQ Remote System *INTNETADR -use this if printing direct to the printer - place print server name here if printer through a print server Remote Printer Queue -place printer name (LAN name) here Connection Type *IP Internet Address -place address of printer or server here This should solve your problem Paul L.

  2. #2
    Guest.Visitor Guest

    Default print from the as/400 to a network print

    On Wednesday, February 18, 1998, 11:49 AM, Steve Prill wrote: I am printing AS400 invoices to a Kyocera laser printer. The printer has an external mechanism that flips the form in a stacker that frequently jams or doesnt stack the paper properly. I would like to run the forms straight through the printer but my invoices would then be out of order. Is there a way (after output is in the print queue) to print from the last page to first page?
    Come to think of it, one way to make the output appears reversed is to rotate the page 180deg. However, page sequence are still maintained! Not sure if this meet your needs.

+ Reply to Thread

Similar Threads

  1. Zebra TLP 2844 on a Network - no print
    By kgregory@benbridge.com in forum Document Management
    Replies: 1
    Last Post: 05-23-2002, 03:47 PM
  2. Printing to IBM Mainframe using Network Print Facility
    By rbmohler@lha.org in forum Application Software
    Replies: 0
    Last Post: 05-21-2001, 10:59 AM
  3. Host print transform to print IPDS print files on ASCII printer
    By Guest.Visitor in forum Application Software
    Replies: 1
    Last Post: 05-31-2000, 09:10 PM
  4. How can I print as400 forms on network printer?
    By Guest.Visitor in forum Application Software
    Replies: 4
    Last Post: 03-05-2000, 09:56 PM
  5. Network print server with as/400 netserver
    By Guest.Visitor in forum Programming
    Replies: 0
    Last Post: 01-01-1995, 02:00 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts