Unconfigured Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

Receiving Error Code A6005004

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Receiving Error Code A6005004

    I am in the final steps of setting up a Model 170, but am receiving the error code A6005004. I have researched the error code which points to the connectivity between 400 and the PC. As far as setup is concerned I am using a direct connection (LCS) between the PC and the 400. therefore I am using cable 97H7557 to slot 08. I then start the operations console which does connect to the 400, and gives me the sign on window (GUI). Upon signing on I receive the AS400 session, but no sign on appears. The 400 displays the error code of A6005004. Does anybody have suggestions on what I am doing wrong

  • #2
    Receiving Error Code A6005004

    Derek, "A6005004 and B6005004 A console device was not found during a manual IPL. A twinaxial controller was found but may not be used. This is only indicating the presence of a controller. It is not indicating the controller may be defective" Looks like you need to attach a twinax device to make the final IPL work. By the way, I just went to Google and searched for: SRC Code A6005004 and had the above response with only 2 clicks. Google is a wonderful tool! chuck Opinions expressed are not necessarily those of my employer. "Derek Halstead" wrote in message news:6ae7e1b1.-1@WebX.WawyahGHajS... > I am in the final steps of setting up a Model 170, but am receiving the error code A6005004. I have researched the error code which points to the connectivity between 400 and the PC. > > As far as setup is concerned I am using a direct connection (LCS) between the PC and the 400. therefore I am using cable 97H7557 to slot 08. > > I then start the operations console which does connect to the 400, and gives me the sign on window (GUI). > > Upon signing on I receive the AS400 session, but no sign on appears. The 400 displays the error code of A6005004. > > Does anybody have suggestions on what I am doing wrong

    Comment

    Working...
    X