***HELP*** Manual Tray feed

[Guest.Visitor]

Hello all, I need some help with a HP4000 printer. I'm trying to get it to pull from the manual tray (tray 1), and it is not pull. I setup the printer using the command crtdevprt. I can pick a page range, duplex, pick number of copies, etc. but I can not pull from the manual page feed. Any help will be greatly appreciated. My printer device is at the bottom for your review. Thank you in Advance.. Device description . . . . . . . . : DEVD LACCT Option . . . . . . . . . . . . . . : OPTION *BASIC Category of device . . . . . . . . : *PRT Device class . . . . . . . . . . . : DEVCLS *LAN Device type . . . . . . . . . . . : TYPE 3812 Device model . . . . . . . . . . . : MODEL 1 LAN attachment . . . . . . . . . . : LANATTACH *IP Port number . . . . . . . . . . . : PORT 9100 Physical attachment . . . . . . . : ATTACH *DIRECT Online at IPL . . . . . . . . . . : ONLINE *YES Font . . . . . . . . . . . . . . . : FONT Identifier . . . . . . . . . . . : 11 Point size . . . . . . . . . . . : *NONE Form feed . . . . . . . . . . . . : FORMFEED *AUTOCUT Separator drawer . . . . . . . . . : SEPDRAWER *FILE Device description . . . . . . . . : DEVD LACCT Option . . . . . . . . . . . . . . : OPTION *BASIC Category of device . . . . . . . . : *PRT Separator program . . . . . . . . : SEPPGM *NONE Printer error message . . . . . . : PRTERRMSG *INQ Message queue . . . . . . . . . . : MSGQ *CTLD Current message queue . . . . . . : QSYSOP Library . . . . . . . . . . . . : QSYS Activation timer . . . . . . . . . : ACTTMR 170 Inactivity timer . . . . . . . . . : INACTTMR *SEC15 Line speed . . . . . . . . . . . . : LINESPEED 19200 Word length . . . . . . . . . . . : WORDLEN 8 Type of parity . . . . . . . . . . : PARITY *NONE Stop bits . . . . . . . . . . . . : STOPBITS 1 Host print transform . . . . . . . : TRANSFORM *YES Device description . . . . . . . . : DEVD LACCT Option . . . . . . . . . . . . . . : OPTION *BASIC Category of device . . . . . . . . : *PRT Manufacturer type and model . . . : MFRTYPMDL *HP4 Paper source 1 . . . . . . . . . . : PPRSRC1 *LETTER Paper source 2 . . . . . . . . . . : PPRSRC2 *LETTER Envelope source . . . . . . . . . : ENVELOPE *NUMBER10 ASCII code page 899 support . . . : ASCII899 *NO Image configuration . . . . . . . : IMGCFG *NONE Character identifier . . . . . . . : CHRID *SYSVAL Remote location . . . . . . . . . : RMTLOCNAME Name or address . . . . . . . . : xx.xx.xxx.xx Device description . . . . . . . . : DEVD LACCT Option . . . . . . . . . . . . . . : OPTION *BASIC Category of device . . . . . . . . : *PRT Workstation customizing object . . : WSCST *NONE User-defined object . . . . . . . : USRDFNOBJ *NONE Object type . . . . . . . . . . : *NONE Data transform program . . . . . . : USRDTATFM *NONE System driver program . . . . . . : SYSDRVPGM *HPPJLDRV Allocated to: Job name . . . . . . . . . . . . . : LACCT User . . . . . . . . . . . . . . : QSPLJOB Number . . . . . . . . . . . . . : 911832 Text . . . . . . . . . . . . . . . : TEXT *BLANK

[Guest.Visitor]

***HELP*** Manual Tray feed

We so this by creating a Workstation customization object. 1. Retrieve WSCST source (RTVWSCST) Type choices, press Enter. Device type . . . . . . . . . . > *TRANSFORM *TRANSFORM, 3101, 3151... Manufacturer type and model . . > *HP4000 Source member . . . . . . . . . > HP4000 Name Source file . . . . . . . . . . > QTXTSRC Name Library . . . . . . . . . . . > TESTTMP Name, *CURLIB, *LIBL Text 'description' . . . . . . . *BLANK 2. Edit it with SEU and look for the Drawer Select DWRSLT statements. Copy the DATA portion from the drawer section of the DRAWER YOU WANT IT TO PRINT TO, and PASTE it into the DRAWER data section of the DRAWER1 that is the default. Exit and SAVE. 3. Create the CRTWSCST object, putting it in the library of your choice. I use QGPL. 4. Change the device description to reference this workstation customizing object you just created. Note that you can manipulate just about any parameters in the WSCST!!

[Guest.Visitor]

***HELP*** Manual Tray feed

This do not work any other suggestions

[Guest.Visitor]

***HELP*** Manual Tray feed

On my HP4000 overriding the printer file with DRAWER(*E1) worked--that's supposed to specify the envelope feeder, but it fed a normal sheet of letter-sized paper from the manual tray. Hope this works for you. Doug

[Guest.Visitor]

***HELP*** Manual Tray feed

I take it back it workded.. I have 3 drawers on my printer if I add another line for tray 3.. would this be okay. If not how would I get it to pull from tray 3? Thanks again

[Guest.Visitor]

***HELP*** Manual Tray feed

And one more thing it print from the manual tray but I have to hit go for each printout is there a way to make it feed by itself

[Guest.Visitor]

***HELP*** Manual Tray feed

If you preload a small stack of paper in the manual tray no operator intervention is required until the tray is empty--you won't even see the initial "Manually Feed" message. Doug

[Guest.Visitor]

***HELP*** Manual Tray feed

Thanks for all your help I got the printer up and working..