Unconfigured Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

Printing from TRAY3 using a WSCST object

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Printing from TRAY3 using a WSCST object

    Can anyone advise how to print from TRAY3 using a WSCST onject Tray 1 & 2 are easy....tray 3 ?? I am using an HP 2100n printer but this would be helpfile for all our HP models.

  • #2
    Printing from TRAY3 using a WSCST object

    We had a similar question regarding a 2000-sheet feeder on an HP 8100 which is drawer 4. You should be able to do a search for that thread and find the response that I got which was quite comprehensive in its explanation. Here is the before and after lines in our WSCST to correct the drawer 4 addressing. /* DATA ='1B266C3848'X. FIX MAPPING FOR DRAWER 4 */ DATA ='1B266C323048'X.

    Comment


    • #3
      Printing from TRAY3 using a WSCST object

      Thank you kindly for this, this has been very helpful & I guess thanks to the guy who helped you...also

      Comment


      • #4
        Printing from TRAY3 using a WSCST object

        Thank you kindly for this, this has been very helpful & I guess thanks to the guy who helped you...also

        Comment

        Working...
        X