Partner TechTip: What's New in QSystem Monitor Release 6?

System Administration
Typography
  • Smaller Small Medium Big Bigger
  • Default Helvetica Segoe Georgia Times

The new iteration of our comprehensive monitoring solution, QSystem Monitor, allows you to manage your IBM i systems even more efficiently.

 

Here's what to expect in the new release.

 

Access Controls: Authority

R6 of QSystem Monitor now features a full-access control system (i.e., Authority). While QSystem Monitor has always had security in the sense that you need to specify a valid user profile and password to use the PC software, once you were past that initial hurdle you had full access to all of QSystem Monitor's configuration and any system's real-time data.

 

So any user who was connected to the host was able to add or remove data definitions, and to change the existing ones. The same applied for thresholds. Any user who was able to display one system's data was able to do so for any other monitored system.

 

QSystem Monitor Authority is the perfect fit for your organization if you:

 

  • Have different layers of system operators (e.g., in-house or outsourced) and you want only one layer to have full visibility into the system and full control of the QSystem Monitor configuration
  • Manage multiple customer systems, each of which needs to view their own system's information but not those of other customers
  • Have semi-technical users who need to display performance data but not change the QSystem Monitor configuration

 

After upgrading to R6, you will notice this addition to the GUI, which shows as a new section on the Home tab of the ribbon:

 

100314Helpfigure1

Figure 1: Turn Authority on and off by logging on via the Home tab of the ribbon.

 

By default, Authority is turned off, and the product allows everybody access to configuration and real-time data for any system once they are connected.

 

To turn on Authority, select Log On and log on as QSECOFR (with the password of a QSECOFR user profile on one of your systems). This will enroll QSECOFR as a user in Authority and will turn on Authority.

 

Immediately after you enable Authority, QSystem Monitor configuration can be changed only by users who are logged on to Authority. ("Logged on" here means "logged on" to Authority. In contrast, "connected" just means you are connected to the host and can communicate with it.)

 

At this point, configuration is display-only for those who are not logged on. If you try to change the configuration without authorization, you are politely but firmly declined:

 

100314Helpfigure2

Figure 2: Users must be logged on to Authority in order to change the configuration.

 

System data can still be displayed by anyone at this stage. In order to limit access to system data, use the various options available in Authority, such as System Authorities, Authorised Users, Authorised User Groups, and Authority Lists. 

 

Use the F1 help as your starting point for the new functionality. You can find the section on Authority in the F1 help for the Monitor module, under Organizing the Data Being Monitored > Authority.

Performance Information for Physical Disks

QSystem Monitor already reports information about the ASPs as a whole and about the individual physical disks that make up the ASPs. This information can be accessed in the ASP View in the Monitor module. R6 brings additional information for the physical disks there.

 

100314Helpfigure3 

Figure 3: This table shows per-physical-disk info prior to R6 and what has been added for R6 and onwards.

 

This addition is the result of a customer request. They'd added shiny new SSD drives to their IBM i and wanted to see how full and how busy they were.

 

If a user can determine from here that the Used % values vary too much between disks, the user can run the Start ASP Balance command to distribute the data more evenly across the disks.

 

The information we show mirrors that shown on the green screen in the Work with Disk Status, but here you have the benefit of its integration into the QSystem Monitor GUI.

 

In addition to these new features, R6 includes new redundant library reporting, auto-color mode in the Detailed History module, and improvements to the installer GUI.

 

Current QSystem Monitor customers can download software updates by logging into their user account. Not a current customer? Request a free 30-day trial and test out the latest release.

BLOG COMMENTS POWERED BY DISQUS